Introduction
July 2, 2006
Management Practices as they relate to Soil Productivity
The proverb, an ounce of prevention is worth a pound of cure, is worth repeating in reference to soil conservation. Preventing soil loss, organic matter loss and soil compaction is far more cost effective than building soil. That being said, minimizing rather than preventing these impacts is more realistic in the industries that supply the goods, which occupy a soil medium, which society demands, including oil, water, food and forest products. In the context of forestry, minimizing soil impacts is a function of the type of silviculture, harvesting, site preparation, slash management and road management implemented.
Paul Zinke, Professor of Forestry at UC Berkeley ranked silvicultural systems and harvesting methods by their degree of soil disturbance. Of the six silvicultural systems, which include single tree selection, group selection, shelterwood, seed tree, clearcutting and biomass harvesting, single tree selection, with 10% of the area affected and 5% of the trees removed, was ranked lowest. Clearcutting, with 90+% of the area affected, was ranked highest and clearcutting where the crowns as well as the logs were removed had a greater impact on soil fertility because the foliage, twigs and branches contain the highest above ground nutrients of the tree. Of the harvesting methods evaluated, feller-bunching and tractor or skidder logging produced a higher degree of soil disturbance than cable and horse logging which produced a higher degree of soil disturbance than helicopter logging.
The type of silviculture, harvesting, site preparation, slash management and road management interact with each other, the topography, e.g. steepness of slope and aspect, and the characteristics of the soil, e.g. shallow, bare, infertile and/ or saturated, to further minimize or maximize soil impacts. For instance, implementing single tree selection will not generate as much slash as a clearcut and therefore may not require the practices typically used to prepare a site after a clearcut. To facilitate planting the next generation of trees after a clearcut piling and burning, broadcast burning, terracing and ripping may be employed, which can lead to topsoil loss, erosion and volatilization of nutrients.
No matter the silvicultural system or the harvesting method, the creation of slash is inevitable. Slash management includes leaving slash in place, burning, lopping and scattering, chipping, packing slash on skid roads or removing slash from the site altogether. Generally, leaving slash in place is best because the nutrient cycle and soil fertility is impacted less.
Roads can significantly contribute to soil loss, organic matter loss and compaction. Minimizing roads, using roads in the season for which they were designed, draining roads well and frequently onto stable surfaces, diversion proofing crossings, and designing crossings for the large episodic event are road management practices to minimize impacts on soil. Moreover, in tractor yarding, restricting equipment to well-located portions of the existing skid road network and prescribing equipment operators to move no more soil than is necessary minimizes soil impacts.
A portion of this production was gleaned from Sustaining Site Productivity on Forestlands; A User's Guide to Good Soil Management published by the University of California.
October 23, 2005
Considering Wildlife Trees During Tree Marking
Wildlife occupies every layer of a tree. In a light intensity single tree selection, during tree marking, you have the opportunity to evaluate each tree individually for wildlife value. Trees that provide preferred habitat to wildlife include goose pens, trees with broken tops and decadent trees.
Goose pen is the name given to a basal tree cavity, which during the homestead era could provide shelter for a goose or a gaggle of geese, depending on the size of the cavity. Goose pen is now used to describe any tree with a basal cavity, most often created by fire. Species that use goose pens include bats for roosting and birds for nesting.
Trees with broken tops facilitate fungal entry causing rot in the stem, which allows primary cavity nesters to begin excavation. Secondary cavity nesters follow. Flat tops provide nesting platforms and are preferred by several owl species if they are concave; meaning the top breaks off below the remaining canopy. Ospreys, a fish eating raptor, will nest in exposed flat tops. Portions of broken tops that stick above the rest of the canopy may be used by birds for roosting and perching.
Decadent trees, trees in a condition of decline, may possess oversized limbs and exfoliating bark, dense clusters of branches caused by a mistletoe infection and rotten cavities caused by some physical damage such as lightening or wind. Large limbs are platforms that support wildlife, the larger the limb the wider the range of species able to use the platform. Exfoliating bark is used by birds and bats to nest and roost. Dense clusters of branches may be used as cover or rest sites for animals including martens, fishers and squirrels. Northern spotted owls have used them as locations to nest. Decaying wood provides the medium in which woodpeckers forage and cavity nesters build nests.
Goose pens and decadent trees are not easily recreated given fire has been suppressed and stand age has been lowered. There is often an inverse relationship between the economic value and the wildlife value of a tree, which facilitates the decision to retain trees with high wildlife value and low economic value.
October 16, 2005
Marking to Improve Stand Structure
By Thembi Borras
Sustainable forestry is largely determined by how a forest management strategy is interpreted on the ground. Single tree selection does not imply sustainable forestry as it can easily be corrupted by high grading; taking the biggest and best trees. Tree marking, deciding which trees will be cut and which trees will be retained is the most important way a forester translates single tree selection on the ground. Although there are a hundred things to consider before marking a tree, the core criteria to improve stand structure, in descending order of priority, are:
1. Remove damaged, dying, or diseased trees. Generally, trees which may die prior to the next harvest. However, some dying trees may be retained to become snags, which are important to wildlife. This is a “sanitation” strategy.
2. Remove suppressed and intermediate crown class trees. These are trees that neither are presently contributing growth to the stand, nor are they expected to do so prior to the next harvest. This is a "thinning from below” strategy.
3. Remove selected larger trees that improve spacing for the higher quality trees, which will be retained. This is a “spacing improvement” strategy.
Target diameters also guide tree marking. For example, at age 50 the largest redwoods in the Jones Family Forest have not yet reached the target diameter of 36" specified in the long term management plan. Therefore, selection leans toward retaining the largest trees.
At age 80, the largest redwoods in the Jones Family Forest have reached the target diameter and selection leans toward removing them to benefit smaller diameter trees. However, not all trees that have reached the target diameter are cut. They are simply preferred if the situation warrants. In a situation where 18" to 24" redwood trees on the north side of the clump would benefit if the 36" tree on the south side were removed, then cutting the target diameter redwood may be warranted. If the removal of the target diameter tree will not benefit surrounding conifer trees because it is out on its own then retaining it may be warranted.
In conclusion, each harvest is used as an opportunity to upgrade overall stand quality by choosing which trees are retained and how they are spaced.
A portion of this production was gleaned from an unpublished paper by Craig Blencowe entitled, Craig Blencowe: Building up the Forest.